Author Archives: snottyragsdale

Neglect

I’m sorry for neglecting this blog. Someday things will pick up and new entries will arrive. I’ve been very busy and my inspiration for this blog has left me. All in time. At least there is plenty for the new reader to see in the interim.

Advertisements

Bicycle Camper Improvements So Far…

100_1183

I don’t always posts pics of myself on NaggingInspiration, but when I do, it’s always with bicycle campers…

So the biggest exterior improvement has been mounting the wheels further back. I did so using firring strips and frustration, more of the latter than the former. I will have to do it again with electrical conduit, at some point. Also, the tow bar needs some work, I’ll see what I can do, but frankly I think I’m going to have to have the male offspring of a firearm welded.

This blog is primarily about the interior improvements, so here we go!

100_1187

I’ve reinforced some of the seams with more gorilla tape and painted the walls and ceiling white. It helps to brighten it and make it seem a little bigger (a couple centimeters of perception makes all the difference in the world when it comes to less than 14 square feet!). Here you see two press dome lights attached with velcro in the foot bay.

100_1184

The thermometer is resting on the shelf from the last blog, below that is a new shelf, 5 and a half inches high by 3′ long.

100_1197

100_1198

That’s quite a bit of extra storage for clothes, canned goods, toiletries and a folding chair, among other things. All in a space that I wouldn’t be using anyway, as it’s too small for any other part of me other than my legs.

My next favorite addition was my curtains!

100_1191

Every day is Halloween! I love how the sunlight filters through these, and with a little velcro they’re going to be perfect for sleeping in when the sun starts rising at 5:30 am!

100_1204

Crappy shot with the lights on inside.

100_1188

Here’s the 3rd of 4 dome lights.

100_1189

The 4th dome light over my folding table.

100_1190

Presto! Cooking surface!

100_1194

These Instabulbs light the whole thing up while I’m in there well enough without the dome lights.

The next thing I’m going to work on are four vents. I’ve discovered that when it’s 20 degrees out or warmer I don’t need my alcohol heater, body heat alone raises the temp by 30 degrees. But my breath condenses on the windows and on the ceiling by morning. The vents will help, even if I have to use a candle heater or alcohol heater, but I doubt I will. I may have to add even more ventilation come Summer, we’ll see.

After the vents I’ll add a cup holder. Then I’m going to work on exterior improvements and be done with it….yeah right, I have a feeling I’ll keep adding stuff to the Pedal-Inn =)

100_1181

My Bicycle Camper: the Pedal-Inn

Let me start off by saying that this was just quickly scrapped together, I’m still working on the tow bar, and the wheels need to be moved back for it to tow properly. Plus I’m not done working on the inside. So there will eventually be more!

017

The over all length is 7′. The first 4′ it is 2′ wide, 38″ at the highest and 33″at the lowest. The last 3′ is 22″ wide by 26″ high. The two window are each 8″x15″ and are scavenged plexiglass. When warmer weather arrives I’ll have to make some modifications so they open and add screens. The black vertical and horizontal lines you see are seams taped with gorilla tape. Like I said, this was made from scraps, ideally it wouldn’t have all those seams, but I have to tell you it is much stronger than I thought it would be! It’s seen some rain and a few inches of icy snow in its week of existence and is holding up fine and leak proof! It probably weighs 20-30lbs, I just know when my friend helped me carry it out the house (where it was put together) we both said “Wow! At least it’s light!!”.

020

If I was working and not so broke I could make it so the rear section slid in like a drawer for travel.

023

Front shot. The walls are made of 1″ dow tuff r insulation board.

026

Rear. You can see the back two legs, which are just some steel tubing pressure fit into wood blocks. Give them a little wiggle with no weight on the rear and they pull out. It has four more legs, scavenged from an old folding table…so to be clear they fold up =)

025

Close up of the door.

028

Under that blue sleeping bag is a smaller sleeping bag for insulation, below that is reflectix, basically bubble wrap with a reflective foil on it. You can see 2 of the 3 strips of dow to help weather proof the door.

029

030

It’s a shame that wire coat hangers are harder and harder to come by, they’re almost as valuable as duct tape or MacGyver’s army knife!

032

033

This shelf is the roof of the rear section, and perfect for holding the contents of my pockets and my trusty lantern.

035

That alcohol heater, on it’s lowest setting, keeps it 70 degrees when it’s 20-30 outside, and raises it to that temperature within 10 minutes! Behind the heater I punched 4 small vent holes so it would not burn my oxygen. That block you see buy the door on the left is what the clothes hanger door latch latches on.

I’m pretty proud of the Pedal-Inn, it works better than I hoped for being something made from scraps and in haste. It could be better. All in time. I can’t wait to finish my motorless home, and to make more versions of it and smaller campers like this!

Bicycle Camper Pre-blog

I’m currently out of work, and don’t know when I’ll have the money to finish my motorless home. I know some of you have been waiting patiently to see it, and I apologize that it’s taking so long. I promise you that someday it will be finished. I already have several ideas for different bicycle campers, all of which have solid walls. Tents on platforms are LAME.

I’ve been bored and itching to make something, pining over the camper, so I decided to use scraps leftover from the motorless home to make a small camper. It took me two days, and part of today, but I’ve got it made. I slept in it last night, and while it’s a bit cramped, I loved it! It was about 30 degrees out last night, but with my alcohol heater on the lowest setting it was 70 inside! I also did some cooking with the Nomad, and had to prop the door open as it was over 80 degrees! I’ll sleep in it tonight with a candle heater, maybe a new one, and see how that works out. There are a couple of things I’d like to add to the camper, so once that’s done I’ll post a real blog and some pics, probably tomorrow.

Pics and blog HERE

Yet Another Wood Stove

I “foraged” this popcorn can from someone’s recyclables. I knew I’d make something out of it, and decided on a wood stove. This isn’t as nice as my postal stove, but it wasn’t meant to be. It just shows what can be done with “trash” in a minimal amount of time.

100_1109

I decided to build this upside down. Why? Because I have a bat fetish, that’s why! No I mean the can would be inverted, for 3 reasons: the top is wider, allowing for a greater heat base,  with the lid on the bottom it would allow for easier clean out, and if the lid was up top there would be the chance of smoke leaking out.

100_1110

First part of the Sapporo can chimney installed. This was scavenged from the postal stove…I’ll make a better one for it once I fix it…and if I ever have the funds to finish my bicycle camper and mount the postal stove in it!

100_1112

Inside view showing flaps in the flue that were cut and folded over to secure it.

100_1111

More “trash”. I had this laying around. Unfortunately denatured alcohol is now sold in plastic containers =( This will be the stove door…and possibly a baffle.

100_1113

100_1114

Inner lines are what will be cut out of the body.

100_1115

I always get caught up in the making and forget to take photos of the process! Why I’ll probably never make an instructables! The next thing I did was take the piano hinge off my heiny keg wood “stove” and mount the door. Then I made a latch and installed it. Then I took the scrap from the stove body and made the cover for the air inlets. I laid the cover on the door, traced it, then drilled the air inlets, then mounted the cover with a rivet.

100_1116

Gratuitous shot of the latch. The whole door flexes, so I didn’t have to make the latch on a pivot point.

100_1117

100_1118

This isn’t airtight when closed, but it serves its purpose. Just showing what can be done in a pinch, after all!

100_1126

Rudimentary chimney finished!

100_1121

Looks like someone may have stolen the popcorn!

100_1122

I’ll build a trap for those popcorn gnomes yet!

100_1127

Just enough room for a hiking pot (filled with popcorn kernels…rotten gnomes, take the bait!).

NOW LET’S GET OUR PYROMANIA ON!

100_1128

FIRST FIRE OF 2013!!! You can see the sticker burning off the top.

100_1129

Lights out!

100_1135

>;D>

100_1138

Works with the door closed!

And because I can’t get enough fire:

100_1142

Today it’s a candle heater!

100_1143

This is a crayon and carbon felt tuna candle!

100_1144

Gotta make sure it works with the door shut!

Commemorating The Devil

All this snow we’re getting here today has me wishing for summer, so I was going through some pics and found some cool shots and thought I’d share. 3 years ago I made a heineken keg fire pit with a little devil face on it. It worked ok but the fire wasn’t very big and it took a lot of babysitting, so the following year I got my hands on a propane tank and made this Hot Devil:

100_0499

 

I’ve had a lot of good times with this little friend.

100_0512

 

100_0510

 

100_0511

 

I’ve had the passerby call this a bonfire…yeah it’s pretty impressive but a bonfire it is not! It took a few hours to make this bad boy. First I had to drain the remaining propane. Then, with the valve open, I had to take my time tipping the tank horizontal and adding water, then tip upright, and repeat…many many times! Fill it all the way up, the water pushes any lingering fumes out so you don’t maim yourself when you drill it out. The only tools I used were a drill with 1/2″ bit and a jig saw.

100_0506

 

Pretty straight forward and a little monotonous, but it was fun when it was done!

My poor poor little devil…on the 4th of July weekend of 2012 he was badly hurt by a mean old tree:

100_0632

 

This guy covered the entire back yard…and fell as I watched! This was first thing in the morning, I hadn’t even had my coffee yet. There was a windy thunderstorm and I was watching it from the back door. I heard two low concussions and instinctively took a couple steps back. That car you see was right in front of me. A moment later the car and fence in front of it had radically changed shape…and that was the most surreal instant of my life so far!

100_0630

 

To help you get an idea of the size of this here’s how the backyard looked from the driveway.

100_0636

 

Here you can see part of the back door I was standing in. Had I not stepped back I would have been struck by small branches that came in the door. Had the tree fallen differently and hit the house there would have been a lot less blogs on this site!

100_0628

 

The headlights are still on and the horn still blaring when this one was taken.

So my fire pit and mailbox wood stove were both damaged but are still functional…the really weird thing is that my bicycle cargo trailer was partially struck and undamaged!

Winter Cycling So Far

This is my first winter cycling. I don’t mean just for fun, but for transportation. I thought I’d need specialized gear, such as a face mask and goggles, and these nifty things called pogies or moose mitts. They’re a glorified mitten that attaches to your handle bars and covers the brake levers and shifters, so that you can slide your gloved hands in.

So far I’ve been getting along just fine by wearing fleece under my jeans, thermal socks, my carharrt coat, gloves, ushanka (rabbit fur hat with ear flaps), hood on coat and alpaca scarf. I would like the moose mitts, as my hands are the only thing that gets cold. To solve this for now I’ve got a bunch of hand warmers.

Temps here lately are in the teens, farenheit, that is. The only days I haven’t ridden were in the single digits with windchills, about 2 days. It’s actually been a lot of fun on the trike. I get asked “aren’t you cold?” quite a bit, but no, I’m not. If anything I have to unzip my coat or loosen the scarf so that I don’t start sweating! Studded tires would be nice, primarily for the rear tire, and for emergency stopping, but all in all the trike handles well in the snow and ice. Another thing I need eventually are fenders, as water splashes onto my gloves! All in time. The tires that came with the Rover are racing tires, for better traction I put the rear tire from my bent bike on it, I don’t know what you’d call the tread, it’s the kind that comes on most mountain bikes. I did this because I was getting flats, I think storing the Rover indoors and taking it out, the drastic change in temperatures, was causing cracks in the tire and allowing small stones to slightly puncture the inner tube. There’s definitely more traction, and I can still fishtail in snow and ice!

Now I do not like the cold one bit, but I’ve honestly been having a lot of fun! Normally in the Winter I have to walk or borrow a friends car, and by spring my legs have lost all their recumbent muscle. You see, riding a recumbent bike or trike utilizes different muscles in the legs than a diamond frame bike. That’s a common complaint among those new to recumbent cycling, especially when going up hills, but once you get your bent legs good luck keeping up on a diamond frame! Bents are plain and simple much more efficient than regular bicycles. So I’m loving keeping my bent legs toned, as the first month or so of Spring my legs would be in agony.

The only complaints I have aren’t seasonal. I don’t like it that most motorists don’t know hand signals, unless you’re turning left that is! I don’t like getting cut off anytime of the year, but especially not when there’s a windchill. I mean, what’s the hurry? Tell me just what is so horrible about being in your car? Is it difficult to apply pressure to the correct pedals, turn that power steering wheel? Is it too much to ask to use your turning signals? It must be awful in there, with that climate control and music, the way most people drive!!!

Get out and pedal, even if it’s just a trip to the corner store! Save some cash on gas and the gym by doing what you could in a car on a bike. You’ll feel better, and you’ll become more respectful when it comes to sharing the road when you see how most people drive! You might just end up driving more carefully, leaving for destinations a little earlier so you don’t have to speed. This could lead to less potential for tickets or rocketing insurance. You might just save yourself or your loved ones injuries or worse, just by driving respectfully. Our society here in America is all about NOW NOW NOW!!! That mentality does your health absolutely no good whatsoever! Stress affects the body, mind, emotions and spirit. Slow down! Enjoy the ride!

Life is a ride, no matter how you take the ride, do so in a manner that’s best for you and those around you!